Timer Recording - Yamaha K-1020 Owner's Manual

13
Timer recording and timer playback is possible using an audio
timer. |
е Timer recording
(D Connect the power cords between all units as shown in
the wiring plan below.
(2) Switch on power to all units, and set the FUNCTION switch on
the amplifier to TUNER. Choose a station. After selecting a station, it
does not matter if the amplifier volume control is altered (it has no
effect on recording level).
(8) Adjust the deck as described in "Before Recording",
(4) Set AUTO MODE selector to TIMER REC position.
(5) Set timer to time desired.
tuner into the amplifier
AC outlet
Switch power swit-
ches on all units on
"Plug the K-1020 and
* Allow some leeway between the timer setting and the time of
the broadcast.
(6) When the time reaches the setting, power is supplied to all units
and recording begins.
* Timer playback
CD Connect the power cords between all units as shown in the
wiring plan below.
(2) Adjust the deck as described in "Before Playback".
(8) Set the amplifier FUNCTION switch to TAPE.
(4) Adjust volume with the amplifier volume control.
(5) Set AUTO MODE selector to TIMER PLAY position.
(8) Set timer to time desired.
(7) When the time reaches the setting, power is supplied to all units
and playback begins.
1 Set recording level to
=" a suitable value
No change in
connections
- Plug the amplifier into |
the timer AC outlet J
TUNER
After using your K-1020 for a certain length of time, it is possi-
ble that the sound of your tapes may deteriorate with fading,
Or noise as a noticeable result. This is caused by an accumula-
tion of dirt or dust on the heads, capstan, or pinch roller, and
magnetization of the heads. It is advisable to periodically clean
and demagnetize the heads and to clean the capstan and
pinch roller. Use a commonly available cotton swab and head
cleaning solution to do this, or use a special head cleaning
tape. Head demagnetizers are also commonly available.
з When cleaning the heads, be careful not to apply unneces-
sary pressure. When demagnetizing the heads, be sure to
foliow the instructions of the head demagnetizer carefully.
* For better access to the head assembly, the cassette com-
partment. cover is detachable by pulling upward on it after it
has been opened. To re-attach it, reverse the procedure.
Tape guide
Erase'head Recording head
Capstan
Playback head Capstan
Pinch roller Pinch roller