Yamaha K-1020 Owner's Manual page 11

ҮАМ Hi А NATURAL SOUND STERED CASSETTE DECK К-ПӘО
GUTPUT LEVEL
>
М
о 10
Serdust З Maud
Closed Loor Dun! Cepsten mechan sr
РНОМЕВ
ов
Feet НИП EUM
t ич
[ ТАРЕ |
ГЕ ігенгір [5755 ьт =] (eee 1 пов
FEC/PAUSE % STOP MUTE/SEARCH
B How to Record
• Before recorcing
Refer to Connection Diagram. Check that leads and power cord are
correctly wired.
@ Set AUTO MODE selector to OFF.
@) Set POWER. switch to ON.
@) Press EJECT button, open the cassette holder and load a
cassette tape.
When recording from the beginning of a tape, allow the tape to
run short distance {about 10 seconds on the counter) until the
leader tape hias passed through.
(à Set the optimum bias for the tape according to "Віав
Adjustment''.
Set the recording mode.
Switch on the MPX filter switch when recording FM stations
wnile using Dolby NR.
(6) Press REC/PAUSE button. The deck enters the recording
standby mode.
DO 49 9 D
(7 Set the master fader knob to the "0" position.
Adjust the recording level to optimum point using level meters -
and Hec Level controls.
(9 Press the RESET button to reset the counter.
This is a reference for recording time and remaining tape time.
It is also useful for locating recordings after they have been
made.
• Beginning recording |
1% Press the PLAY button. The deck enters the recording mode.
1) If it is desired to interrupt recording temporarily, press the
REC/PAUSE button. The deck enters the record standby mode.
When it is desired to start recording again, press the PLAY
button.
49 After the recording has been completed, press the STOP
button.
e |f the MUTE/SEARCH button is pressed during recording, an
unrecorded passage can be put on the tape for as long as the
button is pressed.
Lights up
REC |
Flashes
[REC [e
Non-recorded portion
———— [ape travel
J.
e When the tape has been wound completely, the auto shut
off mechanism functions and the deck comes to a stop
automatically.
Continue
to press
Rec/Pause
о REC Return Mechanism
If the REWIND button is pushed during recording (playback), it
stóps automatically at the point where recording was last begun.
е REC Return mechanism works only after 4 seconds recording.
• |f the tape counter is reset to the ''0.00" position during recor-
ding, pressing the Rewind button for Rec Return will stop the
tape at the "0.00" position, not at the point where recording
began.
Recording start point
!
During recording :
РРА РРА DLL АИ
Rewind
10