Advertisement
Available languages
Available languages
The instructions are given in three languages:
English from page 1 to 13
French from page 14 to 27
German from page 28 to 41
Les explications techniques sont données en trois langues:
Angjais, page 1 4 13
Frangais, page 144 27
Allemand, page 28 4 41
Bedienungsanleitung in drei Spachen:
Englisch: Seite 1 bis 13
Franzésisch: Seite 14 bis 27
Deutsch: Seite 28 bis 41
IMPORTANT (In the United Kingdom)
Mains Supply (AC 240 V~, 50 Hz only)
'IMPORTANT
Do not make any connection to the Larger Terminal coded E or Green,
The wires in the mains lead are coloured in accordance with following
code:
Blue: Neutral
Brown: Live
If these colours do not correspond with the terminal identifications of
your plug, connect as follows:
Blue wire to terminal coded N (Neutral) or coloured Black. Brown wire
to terminal coded L. (Live) or coloured Red.
/f in doubt — consult a competent electrician.
Note
We recommend
that. you
should
disconnect the AC
cord from
the
outlet.
POWER SYSTEM
Connection to the mains supply
The operating voltage of this set is preset to 220 VV (EK-version: 240
VV), at the factory.
Before connecting to mains, check that the voltage selector on the rear
panel is set to the same voltage as veut local mains supply.
Adapting to focal power line
This set operates on either
110, 127, 220 or 240 V~. The voltage
selector
can
be reset as follows. Turn the voltage selector using a
screwdriver until the proper voltage appears at the cutout.
Regarding this setting, consult your JVC dealer.
—
Advertisement
