Modbus Mode; Slyktm Bus Mode - Honeywell TR50 User Manual

DIP Switch (Address settings): The Auto MAC address for the BACnet mode is all
ON/OFF.

4.2.2 Modbus Mode

Slide Switch: The slide switch is set to LEFT to work in Modbus network mode.
DIP Switch (Protocol selection): The Modbus protocol switch is set to ON/OFF or
1/2 address.
DIP Switch (Address settings): The Modbus device address range is between 1 to
247 and it can be configured manually through the DIP Switch.
TM
4.2.3 Slyk
Slide Switch: The slide switch is set to RIGHT to work in Sylk
DIP Switch (Protocol selection): The Sylk
for 1/2 address.
DIP Switch (Address settings): For the Sylk
configure "1,2,4 and 8" address. Do not configure "16 to 128" address.
TR50 - User Guide
Slide Switch
Protocols
Slide Switch
Protocols
Bus Mode
Dip Switch
MAC Address
Dip Switch
MAC Address
TM
TM
Bus protocol switch is set to OFF/ON
TM
Bus device address always
Bus network mode.
15