Changes In Recording Mode - Yamaha A3000 Upgrade Manual

Changes in Recording Mode

Changes in Recording Mode
REC - RECORD - Record
REC- SETUP - Target
Chapter 2 Upgrade Reference
34
The "recording standby" page and "recording in progress" screens have been modified.
Both screens now display a level meter,. and the top right of each screen indicates the
original key that will be applied to the recorded sample.
If recording operation is set to New+ (in the RECORD | SETUP Target page), a PAUSE
command appears above Knob 3 on the standby page. You can pause the standby by
pressing the knob. When you are ready, you can restart the standby by pressing Knob 4
(Continue).
If Knob 2 is set to New+, then Knob 5 (ToPgm) offers three settings: off, on, and NewSB.
If you select NewSB, the A3000 places all of the samples recorded during that series
into a new sample bank.
223
230