Yamaha A3000 Upgrade Manual page 17

PLAY - COMMAND Key - COPY
• You can now use Knob 3 to select the items to be copied. You can choose to copy all
• Knob 2 selects the program to be copied (you can no longer use Knob 3 for this
• If you wish, you can use this function to copy the effect data from one block into
PLAY - COMMAND Key - SETINIT
The EFFECT, SETUP, and CONTROL parameters can each be set to off, current, or factory
(where Version 1 offered off and on).
If you select current, the A3000 registers the current values as the program's defaults.
(This is equivalent to Version 1's on setting.) If you select factory, the A3000 registers
the factory defaults as the program's defaults.
parameters (AllParam), sample assignments and easy-edit data only (Merge), or ef-
fects settings for any one of the effect blocks (Effect1, Effect2, or Effect3). Note that
the AllParam copy overwrites all content of the destination. If you select Merge, the
A3000 includes all sample and sample banks from the source program into the desti-
nation program (by switching the ToPgm settings to on), and copies the easy-edit
settings related to these samples and banks.
purpose), and Knob 4 selects the destination program (you can no longer use Knob 5
for this). If you are copying the settings for an effect block, you use Knob 5 to select
the destination block for these settings.
another block of the same program: simply select the same program as both source
and destination, and set different values for the source and destination effects.
Changes in PLAY MODE
102
104
Chapter 2 Upgrade Reference
17