Yamaha A3000 Upgrade Manual page 31

EDIT - MAP/OUT - KeyRnge
The Low and High parameters at Knobs 3 and 4 now offer a new =Orig setting.
• To set the Low parameter to =Orig, turn Knob 3 all the way to the left. This setting
• To set the High parameter to =Orig, turn Knob 4 all the way to the right. The setting
EDIT - MAP/OUT - VelRnge
The VelSens parameter at Knob 5 now supports values from -127 to +127 (up from -63
to +63 on Version 1).
EDIT - MAP/OUT - Lvl&Mode
An Rnd ("random") setting has been added for the Pan parameter at Knob 3. If you set
the value to Rnd, the pan will change at random each time a note is played.
EDIT - MAP/OUT - Output
The MainOut display above Knob 2 has been slightly upgraded. If you set the output
destination to an effect block, the screen now indicates both the block (Ef1, Ef2, or Ef3)
and effect type that is currently set for that block. Version 1 indicated only the block
(Effect1, Effect2, or Effect3).
[Key Range]
sets the sample's low key equal to the sample's original key.
sets the sample's high key equal to the sample's original key.
[Velocity Range]
[Level & Mode]
Changes in EDIT MODE
170
172
174
176
Chapter 2 Upgrade Reference
31