Software Installation; Plug-In Effect - Yamaha 01X Software Installation Manual

Software Installation

For instructions on how to install the software other than one
referred to below, see page 3 in the section "CD-ROM Contents."
Uninstall (removing the installed application)
You can remove the installed application software.Select [START]
( [Settings]) [Control Panel]
[Install/Uninstall], then select the application to be removed and
click [Add/Remove...]. Follow the on-screen instructions to uninstall
the application.
• The button names or menus may differ depending on the computer OS.
• In order to uninstall the mLAN software, the following two items must be
deleted. Delete them in order, 1 then 2.
1. Install mLAN for 01X
2. mLAN Tools 2.0
Check beforehand the drive name (D:, E:, etc.) corresponding to
the CD-ROM you are using. The drive name is indicated under the
CD-ROM icon of [My computer]. (The root directory of the CD-
ROM driver is indicated as D:\, E:\, etc.)
Acrobat Reader
In order to view the electronic (PDF) manuals included with each
application,you'll need to install Acrobat Reader.
• If an older version of Acrobat Reader is installed on your PC, you'll need to uninstall it
before proceeding.
1
Double-click on the "Acroread_" folder.Four different language folders
will be displayed.
2
Select the language you want to use and double-click on its folder.The
file "arxxx***.exe" file will be displayed. ("xxx" indicates figures and "***"
indicates the selected language.)
• File names with the ".exe" extension may have changed to different names than
indicated here.
3
Double-click on "arxxx***.exe."
Acrobat Reader Setup Dialog box will be displayed.
4
Execute the installation by following the on-screen directions.
After installation is complete, the Acrobat folder appears on your
PC (in Program Files, as the default).For information on using the
Acrobat Reader, refer to the Reader Guide in the Help menu.
6
TOOLS for 01X/Plug-in Effect Installation Guide
[Add/Remove Programs]
mLAN Driver and mLAN Tools
The mLAN Tools software is used to change the mLAN related settings of
the computer. The mLAN Driver software is necessary for transferring
MIDI data, audio data and remote control data between the DAW (digital
audio workstation) and the 01X via the mLAN connection.
• For explanations on error messages, see page 29.
Preparing to install
1
Disconnect all MIDI cables connecting MIDI devices to the MIDI IN/OUT
of the 01X.
2
Using an IEEE 1394 (FireWire/iLink) cable, connect the 01X directly to
the computer (without use of a hub), and disconnect all other IEEE 1394-
connected devices from the computer.
3
Make sure that the 01X is turned off.
4
Start the computer and log in to the Administrator account.
• When using the mLAN connection, make sure to disable any energy saving
features on the computer (such as Suspend, Sleep, Standby or Pause).
• If you are using the S200 data transfer rate standard (check the rear panel of
your particular device, or refer to the specifications in the owner's manual), make
sure to uninstall the old version of mLAN Tools beforehand. (If you are using a
Yamaha mLAN device, refer to the "Uninstall" explanation at left.
5
Select [Start] [Control Panel]. If the control panel appears as shown
below, click "Switch to Classic View" in the upper left of the window.All
control panels and icons will be displayed.
Proceed to the next step.