Table Of Contents - Sanyo VM-EX26P Instruction Manual

SAFETY WARNINGS CONTENTS
England (BEAB) only
THIS PLUG IS NOT WATERPROOF-KEEP DRY
This cord is already fitted with a moulded plug
incorporating a fuse, the value of which is indicated on
the pin face of the plug. Should the fuse need to be
replaced, an ASTA approved BS 1362 fuse must be
used of the same rating, marked thus &>.
If the fuse cover is detachable, never use the plug with
the cover omitted. If a replacement fuse cover is
required ensure, it is of the same colour as that visible
on the pin face of the plug (ie red or orange}. Fuse
covers are available from the Parts Department
indicated in your User Instructions.
If the plug supplied is not suitable for your socket
outlet, it should be cut off and destroyed. The end of
the flexible cord should be suitably prepared and the
correct plug fitted.
WARNING: A PLUG WITH BARED FLEXIBLE
CORDS IS HAZARDOUS IF ENGAGED IN ALIVE
SOCKET OUTLET.
IMPORTANT
The wires in this mains lead are coloured in
accordance with the following code:
Neutral
Brown = Live
As these colours may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured Blue must be connected to
the terminal in the plug which is marked with the letter
N or coloured Blue or Black. The wire which is
coloured Brown must be connected to the terminal
which is marked with the letter L or coloured Brown or
Red.
WARNING: DO NOT CONNECT EITHER WIRE TO
THE EARTH TERMINAL WHICH IS MARKED WITH
THE LETTER E, BY THE EARTH SYMBOL - OR
COLOURED GREEN OR GREEN/YELLOW.
Australia only
WARNING:
@ Return to supplier for repairs.
@ Should the power supply cord become damaged, it
must be replaced by the special cord.
CAMCORDER PARTS NAMES ................... 3
PREPARATION .......... 00. c cece eee ee 4
RECORDING BASIC STEPS................2040. 6
@ Eyesight compensation ring
@ Recording review
@ Installing the battery pack
@ Erasure-prevention switch
@ Loading a cassette
BATTERY PACK AND LITHIUM BATTERY ......... 8
@ Recharging the battery pack
@ Refreshing the battery pack
@ Battery pack
@ Lithium battery
SETTING THE DATE AND TIME.................. 10
CAMCORDER OPERATION .............0000000. 11
@ Preset modes
@ Auto focus
@ Manual focus
@ Zooming
@ Linear time counter
@ Transition recording
@ Fade-in, Fade-out
@ Recording the date and time
@ Remaining tape display
REMOTE CONTROL PARTS NAMES ............. 15
USING THE REMOTE CONTROL................. 15
@ Replacing the lithium battery
PROGRAMMED EDITING USING THE REMOTE
CONTROL ...... 0... ccc eee eens 16
@ Connections
@ Setting the programmed editing
@ Programmed editing
@ Erasing, changing programmed editing settings
PLAYBACK ...... 0... cece eee eens 18
TAPE COPY aasaran 19
VIDEO LIGHT .... 0.0.0.0... cc ees 19
CONNECTIONS ......... 0... 0c cee 20
MAINTENANCE ........0 0.0.00: cece eee teens 21
TROUBLESHOOTING GUIDE ................0004. 22
SPECIFICATIONS ............. 0.00 Back cover
@ Warning indicators