Huawei PDU8000 Quick Installation Manual page 12

4. Install the UPS output power cable.
NOTE
1. The UPS output power cable wiring
diagram on the right is for reference
only. The number of cables to be
connected and the connection
positions vary depending on the
project design.
2. For details about the wiring port
definitions and wiring methods for the
UPS output power cables, see the
Schematic Diagram delivered with the
PDU and the UPS user manual.
(1) Cable (connected to the UPS output)
(2) UPS module installation position
5. Connect output power cables for the air conditioner and IT cabinets, as shown in the figure.
Rear view
Connecting air conditioner cables
6. To separate strong-current cables
from weak-current cables, route the
signal cables upwards along the rack
rail through the holes reserved at the
outer side.
NOTE
The actual number of cables to
be connected and the positions
vary depending on the project
design.
Rear view
Rear view
Connecting IT cabinet and load cables
Front view
11