Huawei PDU8000 Quick Installation Manual page 10

Cable Hole Description
NOTE
The figures are for reference only. The onsite objects prevail.
1. (Optional) Remove the rodent-proof meshes or cut crosses in wire bushings in the top cabling
scenario.
Removing a rodent-proof mesh
2. (Optional) Remove the rodent-proof meshes or cut crosses in wire bushings in the bottom
cabling scenario.
Removing a rodent-proof mesh
3. (Optional) Trim the removed rodent-proof meshes to an appropriate size, and reinstall them in
the PDC.
Cutting a cross in a wire bushing
Cutting open a cable hole at the bottom
NOTE
After cutting open the cable holes in the bottom plate,
install grommet strips in the prepared cable holes.
9