Huawei PDU8000 Quick Installation Manual page 11

(Optional) Wiring for a UPS Installed Inside a Cabinet
NOTE
The wiring diagram is for reference only. The onsite conditions prevail. For details, see the
Schematic Diagram.
1. Connect the ground cable, as shown in the figure.
Rear view
(Optional) ATS input
3. Install the UPS input power cable.
NOTE
1. The UPS input power cable wiring
diagram on the right is for reference
only. The number of cables to be
connected and the connection
positions vary depending on the
project design.
2. The UPS input may include an active
input and bypass input. For details
about the wiring port definitions and
wiring methods, see the Schematic
Diagram delivered with the PDU and
the UPS user manual.
NOTE
 A ground terminal is typically marked
as
 The actual number of cables to be
connected and the positions vary
depending on the project design.
2. Connect the input power cables, as shown
in the figure.
Rear view
(Optional) Circuit breaker input
Rear view
(1) Cables (connected
to the UPS input)
(2) UPS module
installation position
10
.