Canon SCOOPIC 16M Instructions Manual page 23

Exposure Meter Needle
and Exposure
The automatic exposure system of the Scoopic 16M is
activated when the shutter release button is depressed
approximately half way . The lens will then "stop-down"
to the correct shooting aperture and this aperture will
be indicated by the needle in the T /stop scale.
Frame li ne
AUTO Shooting
When the aperture setti ng needle is within the proper
exposure range, press the shutter button all the way.
The film will be fed and will be ready for shooting.
The needle within the right-ha nd red mark means
over-exposure. Attach an ND filter to reduce the light
intensity.
U_5 __
4 _ _
5_. 6 __ 81_' _ ' _ ' - +6 __
2_ 2 ---'!'3.2 ....
IL-------+-----!I - ----'I
Mark Mark
Needle T /Stop Scale
21