Canon SCOOPIC 16M Instructions Manual page 21

Hide thumbs Also See for SCOOPIC 16M:
Table of Contents

Advertisement

• The foca l point does not change by turning the zoom
ring.
• When you wish to keep the subject always in the
center of the picture while zooming, fix the camera in a
stationary position, set the subject in the center of the
viewfinder at the maximum focal length of 75mm (3"),
and focus . Zooming can be performed from any desired
focal length after that .
When you wish to zoom up on a subject and put it into
the center of the viewfinder, set the focal length at
75mm (3"), position the subject in the center of the
viewfinder, return it to the short focal length side, and
then zoom up once more on the subject and shoot.
On the contrary, if the subject is positioned in the
center with the focal length set on the short side, the
slight aberration at that time will be expanded when the
lens is zoomed up to form a zooming aberration .
f = 12.5mm
(If, ")
@)
-
.
. . (®
f = 75mm
(3")
19

Advertisement

Table of Contents
loading

Table of Contents