Canon SCOOPIC 16M Instructions Manual page 15

Setting Filming Speed
The filming speed selector sets the number of frames
to
be fed pe r second. 24 frames is standard for 16mm
movie cameras. Turn the dial and set the desired filming
speed to the index.
Since the film hardens at a temperature of O° C or lower,
the number of frames may be reduced at 48 or 64 fps.
The use of a coldproof case and external battery is
recommended .
The relations between frames per second and exposure
time at a opening of 170° are as follows:
Frames per second
Exposu re time (sec) 1/34
Filming speeds in between cannot be used .
Proper exposure of single frame shot is assured by
setting at 16 fps or 24 fps . Its exposure time is
1/ 34
or
I/ S1 .
Never
use
higher filming
speeds
when unloaded.
13