Canon SCOOPIC 16M Instructions Manual page 13

Adjusting Finder Eyepiece
1. Be sure the finder shutter lever is 0 position.
2, Loosen the eyepiece setscrew, direct the camera at a
bright subject and look into the camera.
3 , Place the EE changeover lever to MANU , turn the
manual aperture ring and set the meter needl e at T2.5.
4 . Turn the eyepiece adjusting ring clockwise and
cou nterclockwi se until grain s are distinctly observed.
Then fi x the eyepiece with the setscrew.
Without this adjustment, proper focusing is impossible .
The range of the adjustment is - 4 to +2 di opters.
11