Installing The Communication Card - Siemens SITRANS L Compact Operating Instructions

Installing/mounting

4.3 Installing the communication card

4.3 Installing the communication card
Communication cards are generally pre-installed. If necessary, follow these steps to install the
card:
Procedure
Damage from electrostatic discharge (ESD)
Some components in the device (such as communication cards, or memory cards) are
sensitive to electrostatic discharge and could be damaged. Be sure to handle such
components in a manner that avoids any potential damage due to ESD.
1. Disconnect power to the device.
2. Insert the plastic screw standoff (supplied with the card).
3. Align card with the mounting post and then press-fit with the two sockets.
4. Use the screw supplied with the card to secure it to the mounting post.
5. To complete installation, see wiring instructions for optional cards in Communication
(Page 43)).
26
CAUTION
SITRANS LT500 with ultrasonic transducer inputs
Compact Operating Instructions, 02/2024, A5E52021877-AA