Installing And Configuring The Sitop Ups1600 In Step 7 V13 - Siemens SITOP UPS1600 Getting Started

Installing and configuring the SITOP UPS1600 in
STEP 7 V13
To use the SITOP UPS1600, it must be assigned as IO device to an IO controller (S7 PLC).
The SITOP UPS1600 in the project can also be equipped with one or more SITOP UPS1100
battery modules.
Preconditions
● STEP 7 V13 has been opened.
● The Hardware Support Package (HSP) of the SITOP UPS1600 has been installed
● A project with an S7 IO controller has been created.
Integrating the SITOP UPS1600
Inserting UPS1600 from the hardware catalog
1. Open the project with the S7 IO controller and change to the project view.
2. Call the network view.
3. In the hardware catalog, navigate to the correct version of the UPS1600.
4. Under the task card "Hardware catalog" in the palette "Catalog" open the folder "Power
SITOP UPS1600 under STEP 7 V13
Getting Started, 06/2014
correctly.
Supplies > SITOP UPS > UPS1600" and click on the UPS1600.
5
17