Connecting A Scalance Xcm-300 With A Scalance Lpe9413 Industrial Edge Device - Siemens SIMATIC NET SCALANCE LPE9413 Operating Instructions Manual

5.8 Connecting a SCALANCE XCM-300 with a SCALANCE LPE9413
Industrial Edge Device
Position
The following figure shows the elements required to connect a SCALANCE XCM-300 with a
SCALANCE LPE.
①
②
③
④
⑤
Types of installation
You have the following options for connecting the devices:
• You can connect the devices and mount them together on a DIN or S7 standard rail.
• You can mount a device on a DIN rail or S7 mounting rail and connect it later.
Note
For mounting on a rail as well as for removing from the rail, plan enough space between the
devices, see section "Dimension drawings (Page 65)".
Connecting devices
NOTICE
Danger of damage to property
The two devices cannot be connected during operation. Disconnect the two devices from the
power supply before connecting the devices.
SCALANCE LPE9413 Industrial Edge Device
Operating Instructions, 07/2023, C79000-G8976-C703-01
5.8 Connecting a SCALANCE XCM-300 with a SCALANCE LPE9413 Industrial Edge Device
Lock (on the device rear of the SCALANCE XCM-300)
Centering pin
Opening to hold a centering pin
Multipole connector for connection to the function extender interface
This connector is closed with a cover in the delivery state.
Function extender interface
This interface is closed with a cover in the delivery state.
Installation and removal
37