KitchenAid KGC3155 Owner's Manual page 7

PRESET COOKING CYCLES/CUSTOM CYCLES
Add grains, rice, or beans to the Ceramic Pot and the built-in scale will automatically weigh the
ingredients. Tap to select the desired recipe from the main menu, and then the Grain and Rice
Cooker will automatically calculate and dispense the correct water ratio and cooking time for
perfect results.
PRESET RICE CYCLE
1.
Fill the Water Tank to the Max (maximum) fill line with the desired liquid.
2.
Turn the Power Switch to the ON (I) position, located on the left side of the appliance.
3.
Select the Rice type by tapping the selection on the screen.
Example: Select WHITE SHORT GRAIN and proceed next.
4.
Add the desired rice to the Ceramic Pot. The Grain and Rice Cooker will automatically
sense the weight of the food when pouring it into the Ceramic Pot.
NOTE: Liquid should not be added at this step as it will alter weight scale performance.
The Water Tank should be filled prior as per step 1, or alternative liquid can be added after
step 6.
TIP: While on the weight screen, the units of measure (cups/oz/g) can be changed on the
screen by tapping the 3 dots on the right.
5.
If the food has already been added, remove the Ceramic Pot for 3 seconds and reinsert
pot in the cooker.
NOTE: Adding food without selecting the cook mode first will limit the unit of measurement
to ounces or grams only. Cups is not available with this method. For best results, level the
food inside the pot for even cooking.
6.
Select Rice preparation, Liquid type, and Desired texture on the screen.
NOTE: It is recommended to rinse rice before cooking for optimal cooking performance to
remove excess starches.
OPTIONAL: If desired, select DELAYED COOK. This can be set for up to 24 hours.
7.
If too little food is added, the letters will flash red and the message "Please add more food
to the pot" will appear. Once completed, the scale screen will appear.
8.
Close the Lid and tap the START option.
9. Once the liquid dispenses, the screen will show an estimated cook time and the
KEEP WARM option. This option can be turned off if desired.
10.
When cooking is about to complete, a countdown timer will appear and audibly notify you
when cooking has been completed. When finished, the Grain and Rice Cooker will
automatically switch to KEEP WARM mode for 6 hours.
IMPORTANT: The Ceramic Pot will be hot. To remove, use pot holders.
PRESET GRAIN CYCLE
1.
Fill the Water Tank to the Max (maximum) fill line with the desired liquid.
2.
Turn the Power Switch to the ON (I) position, located on the left side of the appliance.
3.
Select the Grain type by tapping the selection on the screen.
4.
Add the desired grain to the Ceramic Pot. The Grain and Rice Cooker will automatically
sense the weight of the food when pouring it into the Ceramic Pot.
NOTE: Liquid should not be added at this step as it will alter weight scale performance.
The Water Tank should be filled prior as per step 1, or alternative liquid can be added after
step 6.
TIP: While on the weight screen, the units of measure (cups/oz/g) can be changed on the
screen by tapping the 3 dots on the right.
7