Cleaning & Maintenance - Haier Horno I-Direct x 2 Series User Instructions

Cleaning and maintenance
GENERAL NOTES ON CLEANING:
Regular cleaning can extend the lifecycle of
your appliance. Wait for the oven to cool before
carrying out manual cleaning.
WARNING: Never use abrasive detergents,
steel wool or sharp objects for cleaning, as they
may irreparably damage enamelled parts. Use
only water, soap or bleach-based detergents
(ammonia).
GLASS PARTS
Clean the glass oven window with absorbent
kitchen towel after every use. For stubborn
stains, use a detergent-soaked sponge, wrung
out, then rinse with water.
OVEN WINDOW SEAL
If dirty, the seal can be cleaned with a damp
sponge.
RECOMMENDATIONS:
• After each use of the oven, a minimum of
cleaning will help keep the oven perfectly
clean.
• Do not line the oven walls with aluminium
foil or single-use protection available
from stores. Aluminium foil or any other
protection, in direct contact with the hot
enamel, risks melting and deteriorating the
enamel of the insides.
• In order to prevent eccessive dirting of
your oven and the resulting strong smokey
smells, we recommend not using the oven
at very high temperature. It is better to
extend the cooking time and lower the
temperature a little.
• In addition to the accessories supplied with
the oven, we advise you only use dishes
and baking moulds resistant to very high
temperatures.
CHANGING LAMP:
• Disconnect the oven from mains supply.
• Undo the the glass cover, disassemble the
bulb and replace it with a new bulb of the
same type.
• Once the defective bulb is replaced, replace
the glass cover.
NOTE: In case of a LED lamp oven contact the
assistance for changing the bulb.
This product contains one or more light
sources of energy efficiency class G (Lamp) / F
(10 Led)
EN 15