Advertisement
DIGITAL PROPORTIONAL R/CSYSTEM
Model selection:
From left to right are <FIXED WING> <MULTI-AXIS> <BOAT> <CAR>; Press <UP> or <DOWN> to select the
appropriate option and press <MENU> to finish.
Mixed control setting:
Bind two or more channels of the receiver to one channel of the transmitter and perform linkage; the mixing
settings differ depending on the model selected, and are categorized into two types: FIXED WING/
CAR/BOAT mixed control, and MULTI-AXIS mixed control; Press the <UP> or <DOWN> key to select the
corresponding option, and then press the <MENU> key to complete the process.
Fixed wing, car, boat mixed control
Fixed wing, vehicle and boat mixed control:
CH1/CH2 mixed control:
CH2/CH4 mixed control:
Multi-axis hybrid control:
Combined with the D/R switch, it allows the aircraft to switch between three and six attitudes.
channel 1 and channel 2 mixed control;
channel 2 and channel 4 mixed control.
2.4GHz
Multi-axis mixed control
www.microzone.cn
FHSS
Advertisement
Need help?
Do you have a question about the C7-MINI and is the answer not in the manual?
Questions and answers
Mixing channels
The mixing channels available for the Microzone C7-MINI are:
- Fixed wing, car, and boat mixed control:
- CH1/CH2 mixed control (channel 1 and channel 2 mixed control)
- CH2/CH4 mixed control (channel 2 and channel 4 mixed control)
- Multi-axis mixed control:
- Allows switching between three and six attitudes using the D/R switch.
This answer is automatically generated
no se pueden intercambiar canales
One controller (rocker) goes frontwards and backwards the other rocker lets it go left and right. I did or hit something and now each controller side does front, back, side, to side. How do I get it back to normal, and one side does one thing and the other side does the other?
To restore the original functions of the rockers on the Microzone C7-MINI controller, you need to reset the channel reversal settings. Follow these steps:
` or `` key to select the channel you want to reset (Channels 1-8).
1. Press the `
2. Check the blackened rectangle icon:
- If it is on the left, the servo moves in the original direction.
- If it is on the right, the servo moves in the reversed direction.
3. Toggle the setting to ensure the blackened rectangle icon is on the left to restore the original function.
4. Press the `
This answer is automatically generated
Bonjour, Mon boitier C7-mini ne s'allume plus
The Microzone C7-MINI may not turn on due to the following reasons:
1. Low Battery Voltage – If the battery voltage is too low (below 4V for 4 x 5 batteries or below 7V for 2 x Li-ion batteries), the transmitter may not power on.
2. Battery Not Installed or Poor Connection – Ensure the battery is properly installed and making good contact.
3. Power Switch Issue – The power switch may not be functioning correctly. Try toggling it a few times.
4. External Power Supply – If using an external DC 6V power supply, ensure it is properly connected and functioning.
If none of these resolve the issue, the transmitter may have a hardware failure.
This answer is automatically generated
Bonjour, Merci pour vos réponses , mais je n'ai été assez clair dans ma question. En fait, le boitier s'allume lorsque j'appuie sur le bouton "power" mais ne reste pas allumé lorsque je relâche le bouton. La tension d'alimentation est correcte avec 4 piles x 1,5V . même constat avec alim externe de 6,5V (mesures tension au Multimètre et polarités vérifiées . Auriez vous s'il vous plait le schéma du circuit "alimentation" du boitier Cordialement - S.Piotton.
Bi lahko dobila odgovor kako so pravilne nastavitve za daljinsko robocko kosilnico?
Having trouble with fault light indicator on mower and remote does not Control the drive gear motors
The fault light indicator issue and remote control failure on the Microzone C7-MINI mower could be caused by the following factors:
1. Signal Interference – Operating near mobile phone towers, high-voltage power lines, military radar towers, or other sources of strong wireless signals can disrupt communication between the remote control and the receiver.
2. Low Battery Voltage – If the remote control’s battery voltage drops below the required DC 4.5-9V, it may trigger a low voltage alarm and cause operational failures.
3. Harsh Weather Conditions – Using the remote in conditions such as thunderstorms, snow, or rain can lead to short circuits or signal loss.
4. Water Damage – If rainwater or moisture enters the remote control, it can cause circuit failure.
5. Runaway Protection Activation – If the remote control loses signal, the built-in runaway protection settings may cause the mower to stop responding.
6. Incorrect Frequency Matching – If the receiver and remote control are not properly paired after powering on, communication failure can occur.
Checking and addressing these issues can help restore proper functionality.
This answer is automatically generated