Toro 04504 Installation Instructions Manual page 7

3. Allow the fluid to drain completely from the
gearbox.
4. Clean the plug.
5. Install the drain plug into the drain port
10).
Adding Fluid to the Gearbox
1. Remove the fill-port fitting shown in
1. Fitting
2. Add the specified fluid to the gearbox until the
fluid level reaches the bottom of the fill port.
The gearbox fluid capacity is approximately 1.2
L (40 fl oz).
3. Install the fitting into the fill port
Figure
Figure 11
2. Fill port
(Figure
(Figure
11.
g321851
11).
7