Advertisement
@ Installing the Antenna
Holding the provided antenna at its base, screw the
antenna into the connector on the top panel of the
transceiver.
@ Installing the Belt Hook
If necessary, attach the belt hook using the two 3 mm x
8 mm screws from the supplied screw set.
CAUTION:
DO NOT USE GLUE WHICH IS EXCLUSIVELY
DESIGNED
TO PREVENT SCREW LOOSENING
WHEN INSTALLING
THE BELT HOOK, AS IT MAY CAUSE DAMAGE
TO THE
TRANSCEIVER.
(ACRYLIC ESTER,
WHICH IS CONTAINED IN
THESE GLUES, MAY CRACK THE TRANSCEIVER'S BACK PANEL
oa
4
#8
Advertisement
