Advertisement
The purpose of the Time-Out Timer (TOT) is to prevent the
same persons from using the same channel for extended
periods of time. Holding down the PTT switch for longer
than 60 seconds causes the transceiver to stop
transmitting and generate a continuous TOT tone.
Releasing the switch stops the TOT tone. You can resume
transmitting by pressing the PTT switch again.
Approximately 5 seconds before Time-Out Timer stops
your transmission, the transceiver generates a warning
tone that is different from the TOT tone.
A warning tone (three beeps) sounds.
A TOT tone sounds.
Release the PTT switch to stop the TOT tone.
Advertisement
