Electromagnetic Fields (Emf); Battery Safety Instruction - Philips 6000 Series Instructions Manual

or instructions concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children
without supervision.
Caution
Do not use the product to clean severely greasy, viscous, or dying stains such as shoe polish, paints, and
-
dyes, which are not within the scope of application of the product.
The product is not intended for use by persons with reduced physical, sensory, or mental capabilities
-
or without relevant experience and knowledge, unless they have been given supervision or instruction
concerning use of the product or have understood the hazards involved.
Children shall not play with the product or use, clean, or maintain the product without supervision, and
-
shall stay away from the appliance in service.
Children shall not play with the product packaging bag, as this may lead to suffocation.
-
Place the docking station against a wall on a flat surface. Do not move the docking station when the
-
product is working to prevent impact on product functions.
Before use, tidy loose wires from the ground. Power supply through loose wires will trigger a hazard.
-
Put away perishable objects to avoid any collision and subsequent damage when the main unit is in service.
-
Do not allow people or pets to get close to the rotating position of the brush head while the robot is working
-
to avoid injury.
After use, keep the appliance in a cool and dry place. High temperature and humidity will affect its
-
insulating properties and service life.
Clean the product before storage to avoid odor if it is not to be used for a long time. Remove the
-
stocking station plug from the socket outlet. Charge the main unit fully before storage, and turn off the
switch power at the bottom. Recharge the appliance every two months to prevent battery over-discharge.
Do not place the main unit upside down upon completion of daily maintenance. Do not use radar,
-
surface cover, cushion bumper, or the like as a handle to carry the main unit.
Make sure the product is in a power-off and shutdown state if it is to be transported. Empty the water
-
tank and dust bin, and clean the product before packaging. It is recommended to use the original
packaging box.
Only use the station supplied to charge the appliance. For XU6500, use only with XU6500 Charging
-
Station supply unit, and must use the adapter provided with the base station to charge the appliance.
The appliance use Li-ion battery, and the cell is LG INR21700M50LT, battery pack capacity is
-
4550mAh(4S1P).
Do not recharge non-rechargeable batteries.
-
Aquarius WiFi interface is based on 802.11 b/g/n at 2.4G, with a max output power of 54mW EIRP.
-

Electromagnetic Fields (EMF)

This appliance complies with the applicable standards and regulations regarding exposure to
electromagnetic fields.

Battery safety instruction

1. Use the product only for its intended purpose and follow the precautions and battery-related instructions
in this user manual. Improper use may result in an electric shock, burn, fire, and other hazards or injuries.
2. The product is only intended to work with attached Philips batteries. Use of other batteries may result in
a safety incident.
3. Before disposal of the product, remove the batteries from the robot. It is inadvisable for users to remove
the battery pack by themselves. Please contact Philips' professionals to handle it.
4. Take necessary safety precautions when using tools to open the product or disposing of the battery.
5. Battery removal procedure:
A. Power off the appliance before removing the battery.
B. Use a screwdriver to remove the bottom screws, and remove the front bumper and middle enclosure
in turn.
C. Remove the main board and battery cover.
D. Remove the connecting wire between the battery and the robot.
E. Remove the battery.
6. In case of any need to replace the battery, contact our after-sales service department.
4
English