Table of Contents
Advertisement
RESTRICTED
19
3. Type address character
of required key compartment
AROFLEX prints address character.
If selected compartment is A... W,
AROFLEX prints serial number
and checkword of key, followed by
PAGE 1 on new line. If selected
compartment is X or Y, procedure
signal sounds and CORR lamp (13)
flashes rapidly; SPECAT key must
be inserted and turned.
4. Type Station Identification
and Station Serial No.
("paging information," max
17 characters) if required.
If paging information is not
required, type a CR.
AROFLEX prints paging informa
tion and stores in memory. After
17th character, or after CR, ARO
FLEX generates 15 x LF, 2 x CR,
1 7 x " L t r s "
5. Leave PROC button engaged
on completion of crypto
procedure.
NOTE
Mistakes in the first 16 characters of the paging information can be
corrected character-by-character, using the CORR button (see
paragraph 4.7.).
Alternatively, the crypto procedure can be cancelled and re-started
by releasing the PROC button and pressing it again.
RESTRICTED
Advertisement
Table of Contents
