Samsung AC Series Install Manual page 38

4. FRAME installation and cable connection
⑨ Install the ASSY BRACKET P-FRONT by hanging it on the ASSY BRACKET P-FRAME. (Note No. 2)
※ Be sure to be aware of the instructions below and install the FRONT.
- Be careful not to collide with the left and right FRONTs when installing FRONTs.
(There is a possibility of module damage)
1. Hang between FRONTs at intervals of 5 to 10mm
2. Don't push too hard when moving left and right of FRONT. Make sure they don't bump into each other.
Hang it with a gap of more than 5mm
Fig.1 FRONT gap needs
37
Watch out collisions.
Move slowly
Fig.2 move slowly
LED R&D Lab(VD)