Table of Contents
Advertisement
Introduction
Features
This unit enables you to adjust and correct color while
editing a pre-recorded video tape or during camera
recording.
Its wide variety of functions will greatly
enhance joy of video making.
hy
Color correction using joystick-type controllers
Two joystick-type controllers allow continuous compensation
of the white and black balances.
Press the WIDE RANGE
buttons if a greater range of correction is needed.
Hue/color adjustment
Adjusts the hue and color intensity of video images.
Color bar generator
You can adjust the monitor while displaying a color bar on
the screen and record it on a video tape.
Gamma compensation
You can adjust the luminous intensity of the screen without
destroying the outlines of a recorded object.
Negative/positive reversing
A negative color film can be reversed and recorded ona
video tape.
Wiper and background color generator
You can use the WIPE lever to produce 15 different wiper
effects either up and down or left and right. Wiping the
screen in circle or diamond is also possible. There are eight
separate background colors available in addition to the color
bar.
Video/audio fader
You can control fade in/out of image and sound, together or
separately, with a single lever operation.
Video fade in/out
is possible either in white, black or a selected background
color.
Auto wipe/fader
Professional-looking smooth wiping and fading is possible at
the desired speed.
Video art
You can tint the video image with the desired color. The
tinting can be performed either from the brighter or darker
portions of the image.
Audio mixing
The unit allows editing of sound as well as the video image.
Split screen
You can split the screen into two halves, displaying an
unprocessed video image on one half and a processed
video image on the other in order to compare color
correction effects.
Chroma NR (noise reduction)
Reduces color flickers caused by repeated editing.
4
Precautions
On safety
¢ Operate the unit on AC 120V, 60Hz.
¢ Should any object or liquid fall into the cabinet, unplug the
unit and have it checked by qualified personnel before
operating it any further.
One blade of the plug is wider than the other for the
purpose of safety and will fit into the power outlet only one
way.
If you are unable to insert the plug fully into the
outlet, contact your dealer.
Unplug the unit from the wall outlet if it is not going to be
used for an extended period of time. To disconnect the
cord, pull it out while holding the plug. Never pull the cord
itself.
On installation
© Allow adequate air circulation to prevent internal heat
build-up.
¢ Do not install the unit near a heart source such as a
radiator or air duct or in a place subject to direct sunlight,
excessive dust, mechanical vibration or shock.
¢ The unit is designed for operation in a horizontal position.
Do not install it in an inclined position.
* Do not place any heavy object on the unit.
On cleaning
Clean the cabinet, panel and controls with a soft dry cloth or
a soft cloth lightly moistened with a mild detergent solution.
Do not use any type of solvent, such as alcohol or benzine,
which might damage the finish.
On repacking
Do not throw away the carton and packing materials. They
make an ideal container for transporting the unit. When
shipping the unit to another location, repack it as illustrated
on the carton.
Advertisement
Table of Contents
