Table of Contents
Advertisement
Video Art
Tinting the image with the selected color, starting from either high (with VIDEO ART REVERSE switch OFF) or low (ON)
luminance portions of the image. | J |
1 Set the WIPE lever to the uppermost position.
2 Press any of the WIPE PATTERN buttons.
3 Select the desired color using the COLOR SELECT knob.
4 Operate the VIDEO ART control.
Turn the VIDEO ART control from MIN to MAX.
You can
Turn the VIDEO ART control from MAX to MIN.
You can
gradually tint the image with the selected color. The tinting
make the image gradually return to natural from a screen
starts from brighter portions of the image when the VIDEO
tinted with the selected color. Darker portions of the image
ART REVERSE switch is OFF, and from darker portions
first return to natural when the VIDEO ART REVERSE
when it is ON.
switch is OFF, and brighter portions first when it is ON.
"Note -
This video art function is coupled with WIPE. Make sure that
the WIPE lever is set to the uppermost position. Otherwise
the desired video art effects canot be obtained.
Gradual "fade in" of picture and/or sound at the beginning and "fade out" at the end of the recording
|K
Video fade in/out —
Audio fade in/out
1
Press the VIDEO button.
1
Press the AUDIO button.
2 Press the WHITE, BLACK or BACK COLOR button to
2
Raise the FADER lever fade out and lower it to fade in.
select the fader color. When BACK COLOR is
selected, the video image fades out to, or fades in
from, the color designated by the COLOR SELECT
knob.
(WHITE provides a lighter white color than that
selected by the COLOR SELECT knob.)
Raise the FADER lever to fade out and lower it to fade
in.
15
Advertisement
Table of Contents
