Operation; Rapid Ignition System; Switching On - Miele KM 3034-1 Operating And Installation Instructions


Risk of fire with overheated food!
Unattended food can overheat and
ignite.
Do not leave the cooktop unattended
whilst it is being used.

Rapid ignition system

The appliance is supplied with a rapid
ignition system with the following
features:
- Rapid ignition without the need to
hold the control.
- Automatic re-ignition
If the flame is extinguished, e.g. by a
draught, the burner is automatically
relit. If re-ignition is unsuccessful, the
gas supply is automatically cut off
(see "Thermo-electric flame failure
device").
If there is a power outage, the rapid
ignition automatic re-ignition features
will not work.

Switching on

 Press the control lightly and turn it
anti-clockwise to the large flame
symbol.
 Then press it down firmly to open the
gas supply and let it go.
The ignition electrode will "click" and
ignite the gas.
When a control knob is activated, a
spark is automatically generated on all
burners. This is normal and does not
indicate a fault.
 If the burner does not ignite, turn the
knob to the  burner off position.
Ventilate the room or wait for at least
1 minute before trying again.
 If the burner does not ignite the
second time, turn the knob back to
the  burner off position and see
"Problem solving guide".
You may notice a brief re-ignition (1–
2 clicks) when turning on the
appliance, e.g. because of a draft.

Operation

27