PHILIPS 4000
7.11. Flow-meter
7.12. Boiler
1
7.13. CPU board
7.14. Programming access for SSC (Saeco Service Center)
7.15. KYB interface and display
1
Remove the cover.
3
Loosen the screws for remove
the cover.
2
Loosen the screws slide the
card off the support and
disconnect the electrical
connections.
2
Remove the front panel
membrane
4
Disconnect the electrical
connections.
07 DISASSEMBLY
Lift the flow meter out of the
casing assembly and remove
the electrical and water circuit
connections.
1. Unscrew the screw shown at
unthread the support boiler
2. Unscrew the screw shown and
remove the electrical and water
circuit connections.
Loosen the screw for remove the
cover.
6/7