Product Description - ABB Tina 10B Product Manual

3

Product description

ABB adapter units are used to adapt conventional safety devices where the safety relies on
e.g. one- or two-channel static signals, OSSD outputs, or short circuit detection, to the
DYNlink safety circuit monitored by a safety controller or a safety PLC.
Tina 10A, Tina 10B and Tina 10C are used to adapt light beams and light curtains with OSSD
outputs to the DYNlink safety circuit. This also enables complete external interconnections
using cables with M12 connectors only, which reduces the cabling to and connections in the
apparatus enclosure.
All Tina 10 units have an 8-pole female M12 connector for easy connection to an Orion receiver
and a 5-pole male M12 connector for quick installation to the DYNlink safety circuit.
Tina 10B has an extra 5-pole female M12 connector that enables local reset with a Smile reset
button.
Tina 10C also has an extra 5-pole female M12 connector but the extra connector is instead
used to connect an Orion transmitter (for power supply instead of using an extra M12-3B).
The Tina 10A/10B/10C adapter unit is intended for use in safety circuits in accordance with
EN 60204-1.
2TLC010042M0201 Rev.C
6