NEC Express5800 Series Maintenance Manual page 71

Chapter 2 Useful Features
i. MAC [XX:XX:XX:XX:XX:XX] submenu
Option
iSCSI Attempt Name
iSCSI Mode
Internet Protocol
Connection Retry Count
Connection Establishing
Timeout
OUI-format ISID
Configure ISID
Enable DHCP
Initiator IP Address
Initiator Subnet Mask
Gateway
Get Target info via DHCP
Target Name
Target IP Address
Parameter
Up to 96 alphanumeric Specifies an attempt name of iSCSI.
characters
[Disabled] Specifies iSCSI mode.
Enabled
Enabled for MPIO
[IP4] Specifies IP mode of iSCSI.
IP6
0-[5]-16 Specifies the retry count for iSCSI connection.
100-[16000]-20000 Specifies the timeout time in msec for iSCSI connection.
(Display only) Displays the OUI-format ISID.
6-digit numeric Specifies the lower 3 bytes of the OUI-format ISID. The MAC
address is stored by default.
[Disabled] Enables or disables the DHCP server.
Enabled
IP Address Specifies the IP address of the initiator. This item is not displayed
when Enabled is selected for Enable DHCP or IP6 is selected for
Internet Protocol.
IP Address Specifies subnet mask of initiator. This item is not displayed
when Enabled is selected for Enable DHCP.
IP Address Specifies a gateway. This item is not displayed when Enabled is
selected for Enable DHCP.
[Disabled] Enables or disables the feature to obtain information of the target
device via the DHCP server. This item is not displayed when
Enabled
Disabled is selected for Enable DHCP.
Alphanumeric Specifies the target name with IQN (iSCSI Qualifier) format. This
characters between 4 item is not displayed when Enabled is selected for Get Target
and 223 info via DHCP.
IP Address Specifies the IP address of the target device.
This item is not displayed when Enabled is selected for Get
Target info via DHCP.
Express5800/B120f-h Maintenance Guide
Description
1. System BIOS
71