NEC Express5800 Series Maintenance Manual page 167

Chapter 3 Appendix

Messages displayed on an upper LCD line
BIOS Message on
Upper LCD Line
XX POST Started...
XX BIOS Rev YYYY This message appears while POST is
POST Completed
Successfully
POST ERROR
XXXX
No Available
Memory in System
Error Pause in
POST
Entering BIOS
SETUP MENU
Waiting for normal
temperature
BIOS Recovery
Running
BIOS Updater
Running
System
Configuration
change is detected
PCI Bus System
Error x (x: number)
PCI Bus Parity Error
x (x: number)
CPUx_DIMMx
Correctable Error
Memory DIMM
Sparing Fail - over
on CPUx (x: CPU
socket number)
Memory DIMM
Mirroring Fail - over
on CPUx (x: CPU
socket number)
Cause
This message appears while POST is
running.
"XX" means a POST code in progress.
running.
"XX" means a POST code in progress, and
"YYYY" means the system BIOS version.
POST completes normally.
Error XXXX occurred during POST.
No available memory is installed.
An error occurred during POST.
Starting up BIOS SETUP MENU.
A temperature abnormality was detected
inside the server.
BIOS recovery is in progress.
BIOS update is in progress.
The CPU or memory configuration has
changed since the previous startup.
A system error occurred in the PCI bus.
A parity error occurred in the PCI bus.
A correctable error frequently occurred.
Memory Sparing feature failed over to
standby memory.
Memory Mirroring feature failed over to
standby memory.
Express5800/B120f-h Maintenance Guide
1. Error Message of POST and Virtual LCD
Solution
This is not an error.
Check the message displayed on LCD, and take
an appropriate action.
Make sure that the memory is correctly installed.
Check the error message which appears
on-screen, and take the appropriate action for
each error.
This message will disappear when SETUP
operation is completed.
Lower the room temperature or turn off the power
to cool the server to room temperature before
starting up the server. If this abnormality
continues to occur, check if a fan has failed.
This is not an error. Wait until BIOS recovery is
completed.
This is not an error. Wait until BIOS update is
completed.
If this message appears even when no
configuration change has been made, contact
your sales representative
Contact your sales representative.
167