NEC Express5800 Series Maintenance Manual page 59

Chapter 2 Useful Features
(a) PCI Device Controller and Option ROM Settings Submenu
Option
LAN1 Option ROM Scan
LAN2 Option ROM Scan
Mezzanine
Slot 1 Option ROM Scan
Slot 2 Option ROM Scan
Parameter
Disabled
[Enabled]
[Disabled]
Enabled
[Disabled]
Enabled
Note For a RAID controller, LAN card (network boot), or Fibre Channel controller, if no hard disk
drive on which an OS is installed is connected, set the option ROM for that PCI slot to
Disabled.
Express5800/B120f-h Maintenance Guide
Description
Enables or disables the option ROM Scan for on-board LAN 1.
Enables or disables the option ROM Scan for on-board LAN 2.
Enables or disables the option ROM Scan on each Mezzanine
slot.
Available Boot protocol is displayed if this item is set to Enabled
and a Mezzanine card which has network boot function is
installed.
1. System BIOS
[ ]: Factory setting
59