Miele HS23 Operating Instructions Manual page 39

Cordless vacuum cleaner
Hide thumbs Also See for HS23:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 34
Compare the connection data on the data plate of the
charger (voltage and frequency) with that of the mains
electricity supply. This data must match exactly. Without
modifications, the charger is suitable for 50 Hz and 60 Hz.
The mains electrical plug must be fitted with an appro-
priate fuse.
Check both the vacuum cleaner and all accessories
supplied with it for any visible signs of damage before use.
Do not use a damaged vacuum cleaner or damaged ac-
cessory.
The Miele MultiFloor electrobrush and the Miele Electro
Compact handheld brush (depending on the model) are
additional motor-driven devices designed specially for this
Miele vacuum cleaner. For safety reasons, the vacuum
cleaner must not be used with a different Miele electro-
brush/handheld brush or an electrobrush/handheld brush
produced by another manufacturer.
Before and during use, make sure that no coarse dirt or
debris is/gets trapped in the bottom of the MultiFloor elec-
trobrush or in the bottom of the Electro Compact hand-
held brush (supplied depending on the model).
Store the vacuum cleaner and all accessories at an am-
bient temperature between 0 °C and 45 °C.
Only store the vacuum cleaner in a horizontal position or
fit it into the wall bracket.
While the vacuum cleaner is under warranty, repairs
should only be undertaken by a Miele authorised service
technician. Otherwise the warranty will be invalidated.
en - Warning and Safety instructions
39

Advertisement

Table of Contents
loading

Table of Contents