In Case Of Difficulty - Kenwood CD-223M Instruction Manual

In case of difficulty
C 3-223M/ HF F-,J 30' D (Er •)
To reset the registered contents
The registered contents for title name, music type, and best
selection can be reset by the following procedure.
CD Player
Symptom
** Cause >1*. fr
No power is applied with the POWER! 1
/Ci))
key ON.
•
Power plug is loosely connected.
•
With the power plug connected to the switched
AC outlet of an amplifier, the power of the
amplifier is turned off.
•
Insert the power plug firmly to the AC outlet.
•
Insert the power plug to the wall AC outlet.
Disc is loaded, player does not play.
•
Disc is loose.
•
Disc is dirty.
•
Disc is cracked
•
Condensation occured on the optical lens unit.
•
Insert disc properly.
— MO.
•
Wipe off the dust on the surface of the disc
referring to "Disc handling precautions".
•
Replace the disc with a new one.
•
Leave the player for about
1
hour so that the
condensation is removed.
— ^
36
.
No sound. •
Disc
is
not loaded.
•
Play mode is not entered (The play indicator is
not lit).
•
Disc is too dirty.
•
Disc
is
cracked.
•
The connection cords are inserted loosely.
•
Load a disc and press the
►/!!
key.
—
pQj
•
Press the
►/II
key.
•
Wipe off the dust on the disc surface referring
to "Disc handling precautions".
—;
-3
•
Replace the disc with a new one.
•
Connect all connection cords firmly.
— •
_
o_
Music is interrupted. (Sound is skipped.)
•
Disc is too d.rty.
•
Disc is cracked.
•
Oscillation is applied to this unit.
•
Wipe off the dust on the disc surface referring
to "Disc handing precautions".
— QTJ
•
Replace the disc with a new one.
•
Try selecting a place where no strong vibra¬
tions occur by changing the installation place,
etc.
Scrolling display of "PLEASE CHANGE DISC
OR PRESS PLAY" after flashing display of
"DISCXXX ERROR"
• A disc has been inserted into the carousel with
the label on the left side.
• The disc is very scratched.
• Insert the disc with the label on the right side
and press the
►/!!
key. —
-QyiQ
•
Exchange the disc and press the >t\\ key.
Disc selection is not possible.
•
MUSIC TYPE mode is selected •
Press the MODE key to quit MUSIC TYPE
mode.
—
js=2jTl
Disc begins to play when power is switched
ON.
•
The TIMER
PLAY
switch is set to ON.
•
Set the TIMER
PLAY
switch to OFF unless
timer playback is required.
—
[si29j
Unplug the power cord from the power socket and, while
holding the ■ key depressed, plug the power cord into the
socket again.
Operation to reset
The microcomputer may malfunction {impossibility to operate,
erroneous display, etc.) when the connection cords are un¬
plugged while power is ON or due to an external factor. In this
case, execute the following method to reset the microcomputer
and return it to normal condition.
Unplug the power cord from the power socket and plug the
power cord into the socket again.