Kenwood CD-223M Instruction Manual page 6

w V;VS:.-
'• -a? ' *
Make connections as shown below.
When connecting the related system components, refer
also to the instruction manuals of the related components.
Do not plug in the power lead until all connections are com¬
pleted.
CO-223M/DPF-J301O (fnj
Malfunction of microcomputer
If operation is not possible or erroneous display
appears even though all connections have been
made properly, reset the microcomputer refer¬
ring to "In case of difficulty". —-Q3Q
Be sure to use this unit placed on a level surface.
Optical connection
(Except for the U.S A. and Canada)
Optical fiber cable (Corrimercially-availabie)
j-DETOL^^j-H h 1 To OPTICAL terminals
I like receiver, MD, DAT,
OPTICAL L~J ^ etc_
^RBrnove'heproiectioriC3p
[lfr\j when using the DIGITAL
OUTPUT (OPTICAL! jack.
-dQ^*
SL 16/XS8 switch -LXl