Advertisement
MUTING
Button
This button is used to reduce the volume
quickly
when,
for
example,
a guest
arrives or the telephone rings. When the
button
is pressed once again, the sound
gradually
becomes
louder
and
returns
to its original level.
=
=—
= oe eae
VOLUME
Control
This adjusts the volume level to the speakers or headphones.
LOUDNESS Switch
This switch allows compensation
to be made for ear insen-
sitivity to highs and lows while listening at low volume set-
tings.
Bass and treble are automatically
boosted
by using
this switch.
Do not use the switch at normal volume setting.
BALANCE Control
Adjusts
the relative volume
of each
speaker for optimum
stereo effect.
Slide the contro! until the sound seems to be
coming from the centre of the listening area.
GRAPHIC EQUALIZER Controls
@ Slide a control of a specific range upwards (toward +10 position) to emphasise the sounds in that particular range.
@ Slide a control of a specific range downwards (toward —10 position) to diminish the sounds in that particular range.
e By setting all GRAPHIC EQUALIZER controls to the centre (0) position, the frequency responses will become flat.
a
a
This is the sound range that will bring out the fascinating bass
Slide the knob upwards and sounds from string instruments
sounds of such instruments
as bass guitars or drums.
Slide
'will be emphasised.
Slide the knob downwards for the op-
the
control
knob
upwards
to
increase
output
at these
posite effect.
frequencies
and downwards
to reduce
output at the same
frequency.
The upper register of cymbals and triangles is emphasised by
| 250 Hz |
sliding this knob
upwards.
Slide the knob downwards
to
This is the range that covers human voices and basic sounds
_ reduce tape hiss noises.
of music.
Slide the knob upwards and human voices will be
emphasised and vice versa.
This range affects the middle register which is higher than the
250
Hz range.
By sliding the knob upwards, sounds from a
piano or brass
instruments,
or high human
voices
will be
|
emphasised and vice versa.
Ba ee
When the units are used as parts of the system, system func-
© When
the » button or INTRO
SCAN
button
on the RT-
tion is changed automatically without touching the function
207H cassette deck is pressed:
selector switch on the amplifier, by the following operation.
When
the </m
PLAY/CUT
button,
«4
FWD
button
or
INTRO SCAN button on the RP-207H turntable is pressed:
@When
the TUNER
CALL button on the ST-207H is press- ©
ed:
When switchover is made from TAPE
or PHONO
to another
L
input, playback of tape or record
is stopped automatically.
[E|5
Advertisement
