Advertisement
Begin playing the source
* operation
manual
of
page 21.
>
the stereo tuner).
e@To
record
a
source
from
other
unit, press
) the CD.or AUX button
of the amplifier and set
the unit in play mode.
RECORD
LEVEL
ow
oat
a
@ oioousgouD
fF peepooooed
&t
When
recording music from the tuner or external
unit, etc.,
if a 4- to 5-second
space is made
between
each programme,
this will allow operation of the APSS, APMS or introduction
scan playback features.
.
1 Slide the RECORD
LEVEL
control
to the "0" position
L
during recording at a point suitable for selection editing.
eWhen
not doing a synchro-
nized recording of a record
and recording from the RP-
207H, follow the procedure
at left.
Press
the » button
to
begin recording.
Usually the RECORD
LEVEL control
is set at '5' position in
which the recording level is kept almost appropriate.
If, how-.
ever, that position does riot give a proper recording level, adjust
the RECORD
LEVEL contro! to light on and off the '0 dB"
indicator of the level meter.
Record Level Balance Control
Normally set to the centre position.
If the right and left channels are different, adjust with the
BALANCE control.
2
Press the @ button.
3 Set
the
RECORD
LEVEL
control
to the
"0'' position.
4 Press the >» button to begin erasing.
~TAPE_COUNTER
lofofo}
The tape counter functions for Deck 2 only.
N N
Advertisement
