Advertisement
@ Light the indicator up by pressing the REPEAT or CONT PLAY button.
(For details refer to page 10.)
(For details refer to page 10.)
Continuous Playback
Press the » button of Deck 1
on
1 (APMS playback) fete
ta
ogrammes
Press the » button of Deck 2
Deck 2 (Playing all the programmes
programmes
by
last
selected
pro-
selected
sequence.
gramme.
Rewind
the
cassette
automatically
to
the
beginning
of
its -first-
ly selected programme.
Deck 2 (Playing all the pr:
on one side of the cassette.)
on the side of the cassette.)
Deck 1 (APMS playback)
The
intro-scan playback is a feature which allows you to
listen to 12 seconds of each programme
on pre-recorded
music tapes and then resume forward APSS.
:
This feature is useful for quickly finding a programme that
you do not know the location of.
Follow the operation
as
described
on
page
8,
steps 1 to 3.
elnsert
a
cassette
into
the
cassette
compart-
ment of Deck 1.
Press the INTRO SCAN
button.
The
indicator
lights up.
e Scanned
introduction
playback is continued until the end
of the cassette.
'
ein order to stop scanned introduction playback, press the
|
® button.
@ The intro-scan playback functions for Deck 1 only.
@When
the beginning
of the programme
that was
being
heard or the beginning of the next programme is found, ap-
proximately
12 seconds of the programme
is automatical-
ly played.
At this time, check the programme
to see if
it is the desired one.
e@ After approximately
12 seconds of the programme
is play-
ed, forward APSS is resumed and approximately 12 seconds
of the next programme
will be played and this process is
repeated.
S
; When the desired programme is found, press the >» button.
|@ Reverse APSS will operate and the tape will be
rewound and the programme will be played from the
beginning.
Advertisement
