Wheel Installation - Yamaha RHINO FUEL INJECTION 700 FI 2008 Owner's Manual

EVU00940

Wheel installation

1. Install the wheel and the nuts.
The arrow mark
G
point toward the rotating direction of
the wheel.
Tapered nuts are used for both the
G
front and rear wheels. Install the nuts
with their tapered side towards the
wheel.
2. Lower the vehicle so that the wheel is on
the ground.
3. Tighten the wheel nuts to the specified
torque.
WARNING
Do not reverse the rims on the Rhino to
widen the track width. Installing wheels
improperly increases the risk of wheel fail-
ure and accidents.
on the tire must
8-45
1. Arrow mark
1. Tapered nut