Console - Yamaha RHINO FUEL INJECTION 700 FI 2008 Owner's Manual

5B410011

Console

To remove
1. Remove the seats. (See pages 4-16–
4-17 for seat removal and installation
procedures.)
2. Remove the parking brake lever boot.
3. Pull the console forward and upward (the
drive select lever boot will come loose).
To ease removal of the console, shift the
drive select lever into the low gear "L" po-
sition.
1
1. Console
To install
1. Place the console in its original position.
2. Install the parking brake lever boot.
3. Install the seats.
NOTICE
Be sure to position the seat belt buck-
G
les to the outside of the console.
When installing the console, be sure
G
not to pinch the cables or wires.
G Make sure that the groove at the bot-
tom of the parking brake lever boot
and the drive select lever boot fits se-
curely around the edge of the hole in
the console.
8-9