EVU00940
Wheel installation
1. Install the wheel and the nuts.
NOTE:
_
The arrow mark
G
toward the rotating direction of the wheel.
G
Tapered nuts are used for both the front
and rear wheels. Install the nut with its ta-
pered side towards the wheel.
_
1. Arrow mark
on the tire must point
1. Tapered nut
2. Lower the vehicle so that the wheel is on
the ground.
3. Tighten the wheel nuts to the specified
torque.
Wheel nut torque:
Front: 55 Nm (5.5 m·kgf, 40 ft·lbf)
Rear: 55 Nm (5.5 m·kgf, 40 ft·lbf)
8-41
Need help?
Do you have a question about the Rhino YXR66FAV and is the answer not in the manual?
Questions and answers