Console - Yamaha RHINO 660 Owner's Manual

EVU00690

Console

To remove
1. Remove the seats. (See page 4-15 for
seat removal and installation proce-
dures.)
2. Remove the parking brake lever boot.
3. Pull the console upward.
1. Console
To install
1. Place the console in its original position.
2. Install the parking brake lever boot.
3. Install the drive select lever boot correct-
ly.
4. Install the seats.
CAUTION:
_
When installing the console, be sure
G
not to pinch the cables or wires.
G Make sure that the groove at the bot-
tom of the parking brake lever boot
and the drive select lever boot fits se-
curely around the edge of the hole in
the console.
_
8-8