Sharp QA1150 Operation Manual page 13

Plug the 26-pin connector end of the Macintosh II cable to the 26-pin signal input
connector on the QA-1150.
Use a screwdriver to fasten the connectors securely together (see below).
Macintosh II signal cable
3) Connecting a Laptop or Note book computer
Most Laptop and Notebook computers have "External Monitor Ports". Please refer to your
computr's operation manual for instruction how to connect and access this port. Some
software command or switch may have to be set to view on the QA-1150.
NOTE
The QA-1150 is not compatible with the Macintosh laptop. Do not connect the
QA-1150 to a Macintosh laptop. Serious damage to the computer or QA-1150 could
result.
Third-party adaptors are available for the Macintosh laptop and PowerBook
computers. Contact your Authorized Sharp dealer.
4) Connecting to other Apple Series Computer
Because the Macintosh computers do not have a video connector, you must install an
optional internal adaptor. The Macintosh, 512, Plus, SE, SE/30 and Classic require these
adaptors are available from your local Authorized Sharp dealer.
11