Table of Contents
Advertisement
U-1
Turning on all the connected devices (continued)
Power Management Function
This function reduces the power consumption of the monitor
when the keyboard or the mouse is not used for a fi xed period
even though the power of the monitor is on.
While this function is working, the screen becomes dark and
the power indicator glows green and red.
This function is available only when a computer equipped
with the VESA-approved DPM Power Management function is
connected to the monitor.
When the POWER SAVE in the OSD menu is turned ON, the
power management function works.
RGB:
When the sync signal of computer input (HDMI, DVI-D,
D-SUB, DISPLAYPORT) is terminated, the monitor will
be in the sleep mode in several seconds.
VIDEO: When the sync signal of video input (YPbPr or VIDEO)
is terminated, the monitor will be in the sleep mode in
approximately 10 minutes.
[Description]
DPM: Acronym for Display Power Management
NOTE:
•
The default power management settings (POWER SAVE) for
RGB and VIDEO are ON.
•
When an expansion module is in the option slot, the monitor
doesn't enter the sleep mode even when POWER SAVE in
the CONFIGURATION1 menu is set to ON. Even when other
video input is selected, the monitor doesn't enter the sleep
mode.
Power Indicator
Status
Power-on mode
Power-off mode
Power Standby when
"SCHEDULE" is enable
Sleep mode
The main power is off.
Diagnosis (Detecting failure)
LED
Green
Red
Red On
Green Blinking
Red, Green
Off
Red Blinking
* See troubleshooting on page 58.
English-30
Advertisement
Table of Contents
