Table of Contents
Advertisement
U-1
Turning on all the connected devices
Turning on external devices
1. Turn on the connected devices such as
the computer and DVD player.
Turning on the monitor
CAUTION:
When an OPS-compliant computer is installed as an expansion
module, the computer automatically turns on and starts as the
monitor is turned on.
Don't turn off the monitor immediately after turning it on
because the computer may be in the startup process. Select
OPTION as the video input and wait for the operating system of
the computer to complete the startup process.
NOTE:
When the computer doesn't start within a given period of time
(approx. 1 minute), "OPTION ERROR" and an error message
are displayed. See the user's manual of your computer.
2. Turn on the Main Power Switch.
The power indicator turns on green and the monitor turns
on.
The control buttons on the rear, wireless remote control,
and schedule setting don't work while the main power
switch is off (the power indicator is off).
When using them, check that the Main Power Switch is on
(the power indicator is on).
Main power switch
3. When the power indicator glows
red, press the POWER button on the
monitor.
The power indicator turns green.
Remote control
sensor
NOTE:
•
The remote control sensor is located at the bottom of this
LCD monitor and is diffi cult to see from the front. Check the
location referring "Parts Name and Functions" on page 8.
•
If the remote control (option) is not working properly,
connect the IR sensor supplied with the remote control kit
(option).
NOTE:
Within 2 seconds after turning off the power by the POWER
button on the wireless remote control (option) or the monitor or
by a communication command, don't turn off the main power
switch, don't disconnect the power cord, and don't turn off
the breaker. If the AC power is turned off immediately after
the power-off operation, all the OSD settings including the
language selection may be reset to the factory defaults at the
next power-on.
If the OSD settings are reset to the factory defaults as
described above, reconfi gure the OSD settings using the
following procedure.
1. Turn off the power of the monitor using the wireless
remote control (option) or otherwise.
2. Wait for at least 2 seconds.
3. Turn on the power of the monitor using the wireless
remote control (option) or otherwise.
4. Check and reconfi gure the OSD settings.
English-29
Power button
or
Power button
Wireless remote
control (option)
Advertisement
Table of Contents
