Page 2
Important Information Canadian Department of Communications Compliance Statement DOC: This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2 No. 60950-1.
IMPORTANT INFORMATION FOR CUSTOMERS IN U.K. IMPORTANT The wires in this mains lead are coloured in accordance with the following code: GREEN-AND-YELLOW : Earth BLUE : Neutral BROWN : Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: •...
This symbol mark is according to the directive 2002/96/EC Article 10 Information for users and Annex IV, and/or to the directive 2006/66/EC Article 20 Information for end-users and Annex II. Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality ma- terials and components which can be recycled and/or reused.
DEAR MITSUBISHI CUSTOMER Thank you for your purchase of a MITSUBISHI LCD product. To ensure safety and many years of trouble-free operation of your product, please read the Safety Precautions carefully before using this product. SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled.
Page 6
SAFETY PRECAUTIONS (Continued) 14. Repair — If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a qualifi ed service person to perform repairs. a. When the power cord or plug is damaged. b.
- Never rub or tap the monitor with hard objects. - Unplug the power cord if it is not used for a long time. - Please understand that MITSUBISHI ELECTRIC - Do not attempt to repair the power cord if it is broken CORPORATION bears no responsibility for errors made or malfunctioning.
Contents IMPORTANT INFORMATION ..........1 Connecting the Power Cord .........12 DEAR MITSUBISHI CUSTOMER ........3 Preparing the Remote Control Unit ......12 SAFETY PRECAUTIONS ..........3 Installing the batteries ..........12 TIPS AND SAFETY INSTRUCTIONS .......5 Remote control operation range .........12 Supplied Accessories ............7 Removing the Temporary Stand ........13 Part Names ...............7 Turning Power On/Off ............14 How to Install the Monitor ..........9...
CD-ROM (Utility Disk for Windows): 1 Operation manual: 2 Stand hole protection cover: 2 * MITSUBISHI ELECTRIC CORPORATION holds authorship rights to the Utility Disk program. Do not reproduce it without permission. * For environmental protection! Do not dispose of batteries in household waste. Follow the disposal instructions for your area.
How to Install the Monitor Mounting precautions • Since the monitor is heavy, consult your dealer before installing, removing or moving the monitor. • When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people. •...
Connecting Peripheral Equipment Connection with AV equipment Caution • Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/ disconnecting cables. Also, read the manual of the equipment to be connected. Cr/Pr Cb/Pb AV1 input...
Connecting Peripheral Equipment Other terminals Connecting multiple monitors PC/AV audio output terminals You can connect multiple monitors (up to 5 monitors) in a • Audio from the equipment connected to the AV audio input daisy chain by using the PC1/AV1 input terminals and PC/AV terminals or PC audio input terminal is output.
Connecting the Power Cord Caution • Do not use a power cord other than the one supplied with the monitor. 1. Turn off the main power switch. 2. Plug the power cord (supplied) into the AC input terminal. 3. Plug the power cord (supplied) into the AC power outlet. Main power switch For power outlet...
Removing the Temporary Stand Prepare wall-hanging brackets or a stand to mount the monitor unit. Read the manual for the brackets or stand for the proper mounting procedure. (The screw holes for mounting brackets (M10 x 4 holes) are provided on the rear of the monitor.) Caution •...
Turning Power On/Off Caution TIPS • Turn on the monitor fi rst before turning on the PC or • If the monitor is in the input signal standby mode and you playback device. press the POWER button on the remote control unit, the monitor enters standby mode.
Troubleshooting Before calling for repair services, make sure following checks PC4 or AV3 does not appear properly. for possible remedies to the encountered symptoms. • Is the setting of BNC SELECT correct? (See Operation guide.) • Is the input signal compatible with this monitor? (See pages There is no picture or sound.
Specifi cations Product Specifi cations Model LDT651L LCD element 65" wide (163.9 cm diagonal) ASV low-reflection black TFT LCD Max. resolution (pixels) 1920 x 1080 Max. colors 16.77 M colors (8 bits/color) Pixel pitch 0.744 mm (H) x 0.744 mm (V) Viewing angle 176°...
Specifi cations Dimensional Drawings Note that the values shown are approximate values. Unit: inch [mm] 61-7/8 [1572] 58-7/16 [1485] 3-3/8 [85] 3-3/8 [85] 17-5/16 [440] Opening width (56-3/8 [1432]) Screw holes for mounting brackets (M10 x 4 holes) 15-1/2 [393] 6-1/8 [155] 23-7/16 [595] When mounting the monitor, read the manual of the brackets or stand for their mounting procedure.
Page 20
Specifi cations DDC (plug and play) The monitor supports the VESA DDC (Display Data Channel) standard. DDC is a signal standard for plug and play between monitors and computers. Information about resolution and other parameters is exchanged between the two. This function can be used if the computer supports DDC and it has been confi gured to detect plug-and-play monitors.